Note: You are reading this message either because you can not see our css files, or because you do not have a standards-compliant browser (such as Mozilla Firebird (all platforms), Safari (Mac OS X), iCab (Mac OS 9), or Explorer 5 or above). You would enjoy our site a lot more if you did, but that is up to you.
provides 3Ah of power at 12V, i.e. twenty five 400 foot magazines, or fourteen 800 foot mags on XTRprod cameras, and twenty 400 foot magazines on Aaton 35-III.
NiMH technology is superior to NiCad: about twice the capacity in smaller cells; absence of memory effect eliminates the need to deplete the battery prior to recharging. The battery can be fast charged whatever its state.
A fuse protected Lemo6 socket is provided for accessories demanding more than 500 mA; this prevents large currents to flow through the camera electronic housing.
Technical Specifications:
12V 3Ah (2.9 to 3.2 Ah)
Recellable (4 CHc 2.5x4 screws)
Thermal sensor on pin 3 shuts down the Cha-3 charger when the battery reaches 60°C during charge.
Size: 145 x 73 x 36mm.
Weight: 720g.
is a foolproof micro-processor controlled charger which simultaneously handles two 12V batteries be them NiMH or NiCad Plug the battery (ies) and monitor the charge status from the blinking LED(s) The LED message is printed on the charger housing:
Technical Specifications:
Safe 3.5 hour charging time.
Switches off after 6 hours.
Automatic 110/220V switch over. A spare fuse sits besides the working one, inside the AC plug (5x20mm, 2A).
Size: 182 x 88 x 57 mm.
Weight: 630g.
--
Download the NiMh & Cha-3 brochure (US letter PDF).
cha3.pdf
=end=
^ back to top