Note: You are reading this message either because you can not see our css files, or because you do not have a standards-compliant browser (such as Mozilla Firebird (all platforms), Safari (Mac OS X), iCab (Mac OS 9), or Explorer 5 or above). You would enjoy our site a lot more if you did, but that is up to you.
When used in conjunction with the A-minima camera body,
the Aaton small Power Base extends the camera functions
without compromising its size, weight and ease of use.
The power base is multi functional: as a tripod intermediary
plate, it accepts a standard 15mm or 19mm sliding bridgeplate
for building the camera system for studio work.
A lighter configuration is also possible using the two 15mm Aaton screw-in front rods attached to the power base by means of two 3/8" threaded inserts located at the front of the Power Base.
Both configurations can accept Arri, Chrosziel or other manufacturer's mattebox, follow-focus and support equipment The power base is also an electrical (fused) junction box between a remote 12V power source, the camera body and various accessories such as a zoom control device or lens capping shutter.
Using its BNC connector, the Power Base allows you to automatically synchronize the camera to a source signal such as one delivered by a computer/video monitor.
Finally a remote ON/OFF capability is offered when connecting an Aaton wooden handgrip to the power base Lemo 2 socket.
--
The A-Minima Top Handle has been designed to accommodate new ways of carrying, operating or mounting the camera.
Safely attached to the camera 3/8" top insert, the orientable Top Handle
provides camera On/Off capability, LCD monitor mounting or an extra
3/8"insert to receive accessories such as french flags or assistant
lights.
The On/Off cable delivered with the handle must be connected to the Lemo 6 socket located at the rear of the camera.
The 3/8" insert, located on front of the Top Handle can easily and safely hold accessories such as French flags, assistant lights, HF transmitters...
A ball & socket head can also be attached to the 3/8" insert, in order to use the Top Handle as a small LCD monitor holder.
--
Compact, lightweight and recellable, the 12V - 1.7 Ah A-minima Clip-On battery can run approximately 30 x 200ft magazines at 24 fps.
The NiMH technology is superior to NiCad : about twice the
capacity in smaller cells, absence of memory effect eliminates
the need to deplete the battery prior to recharging.
The Clip-On battery can be charged using the Aaton CHA-3 charger through a cable adaptor connecting the battery Molex connector to the CHA-3's XLR4 socket.
External dimensions: 86mm x 34mm x 61mm.
Weight : 386 gr
--
|
a-monitor 4" Diagonal Green Screen or BW Resolution 320x240 Viewing angle ±65°H +65° - 40° V Video input and power input on FISHER 4 Two knobs for Brightness and Contrast Flips, H, V and reverse, Auto flip function High Brightness monitor 450 NITS Power 10-30V DC Operating temperature -30°C, +70°C Size 131 x 76 x 37 mm Weight: 350 g http://www.transvideointl.com/ |
 |
=end=
^ back to top