Note: You are reading this message either because you can not see our css files, or because you do not have a standards-compliant browser (such as Mozilla Firebird (all platforms), Safari (Mac OS X), iCab (Mac OS 9), or Explorer 5 or above). You would enjoy our site a lot more if you did, but that is up to you.
Keycode reader: 16mm, 35mm, ascending, descending, inverted, positive, negative, 4 perf, 3 perf.
Aatoncode-II Reader: The only system to read all Aatoncode matrixes. The most accurate system for sound synchronisation, better than 1/10th of a frame. With up to 5 stops of latitude for exposure compensation, AatonCode-II is the most reliable sync system available.
Arricode Reader: KeyLink now reads ArriCode without the requirement of the Arri reading head option. Entirely controlled by software.
Contact free reading head: Reads all film codes simultaneously. Does not modify or interfere in any way with the telecine film transport.
Automated head adjustments: No more tweaking. The colorist controls all parameters (focusing, 0/U exposure), directly from the KeyLink interface. Head parameters are stored on a job by job basis.
Multi-format window inserter: Allows up to 13 different window burn-in into analog or digital NTSC, PAL and HDTV, plus VirtualSlates[trademark].
Database management: KeyLink manages all transfer situations. 23.98, 24, 25, 29.97 or 30fps NTSC, 24 or 25fps PAL (@ 24+1 or 25), and 24-24p/HD, even in simultaneous transfer.
VITC/data/vanc inserter: Allows VITC insertion in analog and digital formats, inserts information into the C-Reality and Spirit data stream. VANC insertion available as optional upgrade.
Job based configurations: KeyLink memorises, for each title transfered, all relevant information including VITC and window configuration, head positioning, database parameters, format and audio options. Allows toggling from one client set-up to another instantly.
InstaSync audio synchroniser: Direct, on the fly synchronisation of picture and sound during the telecine transfer from a KeyLink hard drive. With AatonCode or ArriFis, synchronisation within one frame. Also fully compatible with Digi-Slates and simple clapstick. Eliminates all audio and telecine pre-rolls.
Permanent monitoring: Constant monitoring of Keycode, AatonCode and ArriFis reading levels, Video and Audio Timecodes, Pull-down identifiers, TeleCine biphase, Video phase, perf position, database and burn-in accuracy, event in/out/sync points, relative reading position, scene/take entries, audio wave form, foot & frame / Acmade number count, film/tape id. etc... Increases work accuracy and eliminates operator errors.
Flexible transfer modes: The different transfer modes allow you to adapt the KeyLink to your prefered work mode, not the other way around. From direct transfers with on-the-fly scene/take entries to dual pass transfer modes and retransfers for color corrected transfers from original databases, Keylink adapts perfectly to all situations. AutoCatch guarantees accuracy even in "rock n roll" transfers.
Multiple file formats: Keylink can output multiple file formats: Flex, ATN, ALE, Ftl and Root formats. It can also accept files from different formats such as Scriptlink and others.
Single platform hardware: All features and options installed in a single industrial rack mount PC. KeyLink features scalable hardware solutions, ensuring true upgradability.
Greyfinder: Converts gamma-lift-gain into accurate RGB laboratory printer timing values. A unique tool for clients who no longer print dailies.
Specifications subject to change without notice.
=end=
^ back to top